Getaway: High Speed II, The
Williams, 1992Im getting this error in the test report: Check Switch F1 R. Flipper E.O.S.
The machine is playing fine and the right flipper is doing its job.
When I do a Switch Edge test, the right flipper is NOT registering if I move it manually. All other flippers register fine.
I've checked the wires at the E.O.S. and they appear solid.
Anyone have any suggestions as to where I should look next?
When you inspected it, could you see contact being made (or broken) for the EOS? It's pretty important to just let it go, could burn out your coil or worse, if you hold the flipper up for 'a while' it's gonna draw a lot of current all the time without the EOS working.
When I manually raise the flipper on the playfield I can see the two connectors come together and make contact. It appears to be good contact with good pressure.
I won't be playing the machine until I get it resolved.
I checked the connections on the Fliptronic board and everything is seated snuggly.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hs2-getaway-check-switch-f1-r-flipper-eos and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Eureka Springs, AR