Getaway: High Speed II, The
Williams, 1992Hey folks, my right flipper stays stuck up after it is flipped on my HS2. It will go down if a ball hits it. When game is over it will not reset back in down position. Under playfield the shaft that goes into the coil goes in smoothly up to a point, then scapes and gets stuck inside the coil. Anytips or ideas would be appreciated. Is my first rebuild coming!?
Let me know if I did not describe something correctly. I am learning slow and steady, but having fun along the way. Thanks
Flippers are pretty basic.
If the sleeve in the playfield is smooth and the flipper moves smooth then it may be the sleeve in the coil. These can crack and break. Or something happened to the coil.
There is also a spring on the flipper to bring it back to home position.
Check all 3 in order.
Plunger assembly looks worn and has some pitting and gets rough going into the coil sleeve. Time for a new plunger assembly and coil sleeve. Anything else I should look at before I order new ones? Thanks for your help.
Quoted from pinnyheadhead:Anything else I should look at
https://pinside.com/pinball/forum/topic/vids-guide-to-upgradingrebuilding-flippers
LTG : )
Get a complete rebuild kit. There is nothing like freshly rebuilt flippers...well, except for nice knockers. 
--
Chris Hibler - CARGPB #31
http://www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Quoted from ChrisHibler:Get a complete rebuild kit. There is nothing like freshly rebuilt flippers...well, except for nice knockers.
--
Chris Hibler - CARGPB #31
http://www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Rebuild it is. Uh, Chris........you own 51 pinball machines! You win! 
Quoted from pinnyheadhead:Uh, Chris........you own 51 pinball machines! You win!
--
Chris Hibler - CARGPB #31
http://www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
http://www.PinWiki.com - The new place for pinball repair info
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hs2-flipper-sticks-help-please and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Dunwoody, GA