I put the controller on my red tremors in Metallica and Star Trek.....works amazing, very close to stern shakers.
You're currently viewing posts by Pinsider foureyedcharlie.
Click here to go back to viewing the entire thread.
I put the controller on my red tremors in Metallica and Star Trek.....works amazing, very close to stern shakers.
Quoted from ita47:Why not just buy a factory Stern shaker motor and not have to mess with the motor controller or trying offset the weights? Stern sells their shakers for $125 for Sam or Spike systems. The aftermarket shakers don't include the ground harness that plugs into the back box or the filter board for the flipper switch inputs at J3 on the CPU board, both of these are included with the Stern Sam shakers.
http://costore.com/sternpinball/productenlarged.asp?peid=235&pid=5432946
Well, I paid $75x2 for my red tremors at Expo......I like saving $100.
Quoted from The_Dude_Abides:Am I doing something wrong here?
Whoops.....you hooked it up wrong. Your output is correct, but You have the wrong inputs. You need to splice the other connector, the inputs are the black and red wires from the shaker board not the gray side.
You're currently viewing posts by Pinsider foureyedcharlie.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/how-to-tame-cointakers-shaker-motor?tu=foureyedcharlie and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.