The Simpsons Pinball Party
Stern, 2003I'm planning on running a tournament and don't want super long ball times on TSPP. I'm planning on removing the rubber ring on the right inlane/outlane but I'm not sure how to setup the two posts between the outlane and shooter lane. My thought is to move both to the top hole, would that be that setting make it the most difficult?
Quoted from LTG:Shouldn't it be top one top hole, bottom one bottom hole, to make the biggest hole ?
LTG : )™
But if the bottom one is all the way down doesn't that make it easier to get the ball back into the shooter lane?
Quoted from tmontana:But if the bottom one is all the way down doesn't that make it easier to get the ball back into the shooter lane?
I see what you are saying.
Then I'd go top one bottom hole and bottom one top hole. Make as small a hole as possible.
LTG : )
Quoted from LTG:I see what you are saying.
Then I'd go top one bottom hole and bottom one top hole. Make as small a hole as possible.
LTG : )
But then doesn't that make the outlane gap smaller? This is what has been making me question my thinking. 
Actually the biggest gap would be to remove the posts all together.
I would probably not go further than bottom post in bottom most hole and remove the top post all together.
Thanks dude, I'm going to set mine back to then. Do you mind reporting what it's at on the left side? Thanks in advance ^_^
Quoted from LTG:Put a rubber ring around both of them and call it a day.
...and remove the rubber ring between the 2 lanes so the ball can't bounce out.
Tried the rubber ring between the two right posts but that made the outlane very narrow. Decided to go this route instead. This closed the opening into the shooter lane and made the outlane as large as possible at the same time. I guess I could've removed all the rubbers too but I just took out the left one
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/how-to-setup-tspp-right-outlane-at-the-most-difficult-setting and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Livonia, MI
