Next time, please use 33k resistors, 33000 Ohms. Or bring the display to someone who knows what he is doing….
You're currently viewing posts by Pinsider MarAlb.
Click here to go back to viewing the entire thread.
Next time, please use 33k resistors, 33000 Ohms. Or bring the display to someone who knows what he is doing….
You are welcome. This can be an expensive screw up....
Did the HV section on your power supply survive?
Hopefully only the Q1-Q4 transistors and the surrounding resistors died and not the glass or the HV drivers (PLCC44 IC's)…..
Don't bother to replace D5 because that one is ok. 71V is an ok reading. Your other readings are probably -151V and -139V (minus). Notice the 12V difference between these voltages which is ok. The 110V zenerdiode went to heaven and probably also the MJE transistor behind it. When you choose to use the LED display it is ok to just remove the fuse.
You're currently viewing posts by Pinsider MarAlb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/how-to-set-your-data-east-128x16-display-on-fire?tu=MarAlb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.