I too would like to know tryed hooking up a pinbits shaker with no shake i installed the black wire to ground then the orange to the - side of the flasher then the red to the two orange wires on the flasher
You're currently viewing posts by Pinsider delta9.
Click here to go back to viewing the entire thread.
I too would like to know tryed hooking up a pinbits shaker with no shake i installed the black wire to ground then the orange to the - side of the flasher then the red to the two orange wires on the flasher
You can use these shakers on many stern data east and williams / bally they hook up to the flasher i have one on a sopranos real easy to hook up red wire goes to the postive side on the flasher black wire is ground blue wire is the trigger goes to the neg side of the flasher im 99.99 percent sure they will work on all pins above
Quoted from beelzeboob:I can confirm you use an STTNG motor on Congo. My question is, can you use one of those AFM motors on a POTC?
My other question is, why doesn't Pinbits ever get enough of these things in stock? Seems they'd make a killing on them if they stocked enough.
Yes u can use afm shaker for potc
You're currently viewing posts by Pinsider delta9.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/how-to-install-shaker-motor-into-pirates-potc?tu=delta9 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.