Good timing - looking in to doing this. I understand there are different parts needed but is the kit worth 250? When looking at piecing it together seems much cheaper.. what am I missing?
You're currently viewing posts by Pinsider djsolzs.
Click here to go back to viewing the entire thread.
Good timing - looking in to doing this. I understand there are different parts needed but is the kit worth 250? When looking at piecing it together seems much cheaper.. what am I missing?
Ok thanks for confirming I was wondering if I was missing something
Quoted from Astill:way cheaper to piece it together. roms and pal chip $36 shipped , shaker is $100.
I just got my parts to give this a go. Here is what I am attempting:
1. Shaker Motor: https://www.pinballlife.com/shaker-motor-kit-rev-b-for-most-stern-sam-system-games.html
2. ROM and PAL chips (10,02 cpu , 10. 0 display , gold pal chip and shipping) - from Astill seen above
Thanks for posting these pictures and notice I’m about to do mine!
Quoted from Morgoth00:Just an update- decided to risk it and cut the connector off the red/white wire and hooked that to the interlock with a splitter, for power. And then cut the connector off the brown/white and hooked that to J16 for trigger. Also used the little capacitor board. At first I thought it wasn't working, but once I disconnected the Pinsound woofer in the cab then I could feel it. It's amazing how much rumble the pinsound speaker causes that it can hide the effects of a shaker! Shaker working good now
//<![CDATA[
window.__mirage2 = {petok:"588c99152357f318d246d7afae2036a81e6cb213-1627254829-1800"};
//]]>[quoted image][quoted image]
You're currently viewing posts by Pinsider djsolzs.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/how-to-install-shaker-motor-in-lotr-standard-edition?tu=djsolzs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.