mine just wiggled apart , but I do see a little catch in there
Quoted from clodpole:
>Called a 'friction lock' -- just grab and pull.
It isn't only friction; you can just make out 2 small tabs with spring locks on them in the photo above. Pulling alone doesn't release the tabs and so far I haven't figured out how....
wiggling while pulling apart is how mine came loose. in the photo, the tab on the upper half of connector does not push in at all; the lower half of the connector may spread apart slightly as I wiggle
I haven't figured out what conductors do the lamps on the coin slot but may be able to read both side of connector without unplugging
my coin door has 3 slots , 2 quarter & 1 dollar coin slot
I don't have a coin box for your measurements
my coin door lamp wires seem to trace back to the Rectifier board ( I just happened to have my playfield up working on feature lamp sockets)
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside