I have a Gottlieb super soccer that is missing the coin door mechanisms. Is there any way to start the game through a relay? Or something else?

It is missing he coin door and start buttons.

image-88.jpg

The side connection pins are.image-689.jpg
But nothing that attaches to the coin door

I have schematics I just don't know what to do

Which cables should I jump?

I pressed the switch and nothing happened it isn't getting voltage

Today I started removing the paint off the left cabinet.
image-373.jpg
I also cleaned more switches.

Yes I checked wires and made sure all joints were hooked up.
Plus I never work on a machine while it is on unless I have to

It's a 6 pin but all I need are the mechanisms and the harness. Not the door.

I wired the machine and got .3 volts ac on the start relay mechanism and 4.85 on the jones plug.
Is that normal?

I have the bounce switch hooked up but not anything else. What should I also hook up?

I understand the schematic it's just the wires coming off the fuses don't match up. Or at least it's hard to tell

Oh finally got it! It was a loose connection on the fuse

Unfortunately the motor controlling the game won't stop now and the thing is stuck in an endless cycle

It's the coin reset switch

Don't worry I got the whole coin door harness and mechanisms for $30 off of ebay