Jan 1, 2022, getting my BK2K repair skills on!
796E97CF-1D2E-445A-AF6E-4CDCB8A0378E (resized).jpeg(Topic ID: 307154)
Linked Games
-
Black Knight 2000
Williams, 1989
Topic Gallery
Hopkins, MN
Quoted from Completist:Making coffee, then going to put Funhouse back together.
[quoted image]
What sort of voodoo coffee science laboratory you got going on there?
Quoted from Coindork:What sort of voodoo coffee science laboratory you got going on there?
My new hobby! On the quest to make (then replicate) the perfect cup haha.
Quoted from Completist:Making coffee, then going to put Funhouse back together.
[quoted image]
I would need to drink a coffee before being able to put that coffee lab together
Burr grinder, kettle, pour over, what's so complicated about that? I'm coming over for coffee at your house completist!
I'm starting new years slowly.
Gotta help the missus with the great X mas take down, wish me luck,!
B
Going to dig out all the camera stuff I have packed away and think about live streaming again in January.
Wife and I made 15+ quarts of chili. Also a pot of pasta fagoili. Sealed it all up in bags with the Foodsaver, which is a whole project in itself.
May start working on my Drop A Card project, clean the Jones plugs & see what works.
Quoted from Llabnip1972:Intermittent fasting
Is that the same as intermittent eating?
Quoted from undrdog:Wife and I made 15+ quarts of chili. Also a pot of pasta fagoili. Sealed it all up in bags with the Foodsaver, which is a whole project in itself.
May start working on my Drop A Card project, clean the Jones plugs & see what works.
you had me at chili
Still gotta loose like 50+ lbs. just getting back from an all inclusive in Mexico didn’t help. Ate and drank literally everything in site . They were like “senor.. time to go home “
This has gotta to be the year !
We rejoined YouFit. Haven’t gone yet.
Working on pinballs is mostly standing up. That's good exercise right there.
Quoted from TheLaw:Hungover shower sex
Ha! Much better than putting blow up Santa back in a shed.
Trondheim
St. Albert, AB
Quoted from JPloof:Took down Christmas decorations. Watching hockey. Just installed the TMNT April mod, time for pinball!
I spent the first four hours of the year in an emergency room after my wife yawned and dislocated her jaw. This year is already better than the last 
Quoted from daveyvandy:I spent the first four hours of the year in an emergency room after my wife yawned and dislocated her jaw. This year is already better then the last
Ouch!@!!!!!
I think I just passed the half way point in my Addams restore / swap. Looking forward to finishing the job and playing it again.
Quoted from daveyvandy:I spent the first four hours of the year in an emergency room after my wife yawned and dislocated her jaw. This year is already better than the last
Hey if that’s the worst that happens this year that’s a good thing
finishing up all the little repairs in the next few days so i can put this CV out on location within the month. got the coin mechs installed and the right coin switch resoldered. now on to fixing a non-working flasher and reinforcing the cracking translite lift channel plastic so it'll hold at least until i get a replacement shipped from Australia. likely more stuff i'll run into but at the moment that's what's left on my list.
probably gonna pull the topper too. it came with it but it's just not to my taste, and it was mounted off-center anyway.
Quoted from mc300baud:finishing up all the little fixes in the next few days so i can put this CV out on location within the month. got the coin mechs installed and the right coin switch resoldered. now on to fixing a non-working flasher and reinforcing the cracking translite lift channel plastic so it'll hold at least until i get a replacement shipped from Australia. likely more stuff i'll run into but at the moment that's what's left on my list.
probably gonna pull the topper too. it came with it but it's just not to my taste, and it was mounted off-center anyway.
[quoted image]
I would trash that topper also, so tacky and ugly
Quoted from pincoin:I would trash that topper also, so tacky and ugly
it appears to be glued on so it's been at the bottom of the list to take care of (if it were just a couple of screws it'd be gone already.) the white LED lighting that came with it was trashed so i stuck a section of cheap RGB LED strip and made it as purple as i could. it almost glows like blacklight and the effect is good but yeah, even with that it's just not all that attractive.
Quoted from ultimategameroom:Solo or with a partner?
Both!
In bed by 9:30 last night, not a drinker. Got up, walked the dogs. Watched some tv. Ran on elliptical.
Boring…
Prague
Said I was going to eat lighter this year.
Proceeded to throw a marinated spatchcock chicken in the smoker with mac & cheese, roasted seasoned potatoes, and brown sugar rolls tonight for dinner.
I'm gonna put together a model of the Titanic, that I bought last Christmas. I'm also going to play more video games on my PS3. Maybe by the time I get this model put together, and I play a bunch of video games,pinball price's will come back to earth. 
Then I might pick up another pinball machine.
Hobbyists who put models together all the time, said it took them two months to put the Titanic together. So I figured it'll probably take me eight months. 
Screenshot_20220101-200851 (resized).pngQuoted from ZooDude:Burr grinder, kettle, pour over, what's so complicated about that? I'm coming over for coffee at your house completist!
I'm starting new years slowly.
Gotta help the missus with the great X mas take down, wish me luck,!
B
Any time! Though coffee is a morning thing. By evening it’ll be my other other hobby - pre-prohibition cocktails…
40DD0066-BD48-4E6A-938A-AB7A9ED1AE0F (resized).jpegB9D970E8-9B30-4E4F-A0F5-907ABF43752A (resized).jpegQuoted from ralphs007:I'm gonna put together a model of the Titanic,
LTG : )
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
