Looking at an Apollo 13 for a friend and have an odd issue. You can press the start button but when the screen comes up to select game the flipper buttons aren’t responding. Can’t go one from there and just stuck. If I go into the diagnostic menu I can move around and navigate using the flipper buttons. Has anyone run across this before?

Also in solenoid test when I tried the flippers they seem weak and the left one barely wanted to move on its own. Not sure if related.

Still can’t get past the screen where it asks you to select what type of game with the flippers.

In case it is a switch stuck issue can someone take a picture of the switch test screen that shows what switches are normally on and off? That would assume all the balls are installed.

Still want to try and help a friend get his Apollo 13 running. Wanted to see if someone can get a picture showing the switch test and what switches should be closed by default. Want to compare that to see if any are registering that should or if there is a stuck switch. Can anyone help?

Would still like to help out a friend that has an Apollo 13 that is down. Not sure if it is just a switch issue or something larger. What would help is if I could get a picture of the switch test screen for a working game that shows the state of each switch when everything is correct and all the balls are in their correct locations. With that I can match it up to see if any switches are set that shouldn't be or any switches that aren't active that should be. As it stands now don't know by looking at that screen if it is correct or not.