New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 217169)

Houdini Mods available Hookedonpinball.com 1-31-19


By HOOKED

2 years ago



Topic Stats

  • 57 posts
  • 14 Pinsiders participating
  • Latest reply 1 year ago by Ericpinballfan
  • Topic is favorited by 9 Pinsiders

You

Linked Games

Topic Gallery

There have been 15 images uploaded to this topic. (View topic image gallery).

sj pf next to trunk (resized).jpg
waiting.gif
tank1 (resized).jpg
Tank2 (resized).jpg
20181006_172457 (resized).jpg
20181006_172507 (resized).jpg
20181006_172603 (resized).jpg
20181006_172549 (resized).jpg
jacket (resized).jpg
kevin color adjust three (resized).jpg
teaser (resized).jpg
man intank (resized).jpg
8397074626_5d484e25cd_b (resized).jpg
tank (resized).jpg
houdini12 (resized).jpg

There are 57 posts in this topic. You are on page 2 of 2.
#51 1 year ago
Quoted from HOOKED:

Putting out feelers for another mod.
Replaces the factory ramp lamp plastic with a real lamp which is lit by the factory led board and replaces the spot light on the stage with new lighting.
All factory plugs just better life like look?
Also debating on a shooter plate fitting for the machine much like our Mustang and Munsters plate.

Those would be outstanding - especially the lantern.
Count me in!

3 months later
#52 1 year ago

Is the ramp lamp mod ever going to happen? I think it would be a big improvement to the stock plastic.

#53 1 year ago
Quoted from Platypus:

Is the ramp lamp mod ever going to happen? I think it would be a big improvement to the stock plastic.

Drawings were made casting estimated but not enough demand. Game stopped production shy of 600. I would have to sell 30% to break even. So no we didnt go further.

#54 1 year ago
Quoted from HOOKED:

Drawings were made casting estimated but not enough demand. Game stopped production shy of 600. I would have to sell 30% to break even. So no we didnt go further.

How about a 3D print version? Is that something you guys do?

#55 1 year ago
Quoted from HOOKED:

Drawings were made casting estimated but not enough demand. Game stopped production shy of 600. I would have to sell 30% to break even. So no we didnt go further.

Very curious- where did the 600 number come from? I’ve wondered, but never seen anything solid.

#56 1 year ago
Quoted from Rdoyle1978:

How about a 3D print version? Is that something you guys do?

No 3d print. The technology isnt what I would want for and finish wise. I dont like the cross hatching it makes and long term durability remains to be seen. My mods normally are full cast resin or metal. Our version of the ramp lamp was cast metal with bronze housing and nickel pole. Basically replaced the plastic all together.

#57 1 year ago
Quoted from zahner:

Very curious- where did the 600 number come from? I’ve wondered, but never seen anything solid.

Confirmed. From management straight to my face at show. There were just under 600 made.

Quoted from HOOKED:

No 3d print. The technology isnt what I would want for and finish wise. I dont like the cross hatching it makes and long term durability remains to be seen. My mods normally are full cast resin or metal. Our version of the ramp lamp was cast metal with bronze housing and nickel pole. Basically replaced the plastic all together.

Would love to have seen it made.
The numbers and cost dont ad up.

Promoted items from the Pinside Marketplace
$ 139.95
Cabinet - Shooter Rods
Super Skill Shot Shop
There are 57 posts in this topic. You are on page 2 of 2.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside