OP

Quoted from triggur:

UPDATE:
With some careful effort and the kind help of Cliffy by way of AP, I've got the problem largely fixed/covered up. I removed the mylar and trimmed back the chipped clear coat to a line about 3 mm into the tip of the arrow, touched up the paint a little, and then clearcoated it back layer by layer, then I put down a new mylar.
Enter Cliff: I sent some pics of the scoop assembly outlines and such, and he produced a version with a deeper front lip, a notch taken out of the rear right to clear the rail, and a larger clip on the bottom front. As a result, the scoop assembly traps the lip nicely.
Thanks again, Cliff![quoted image][quoted image][quoted image][quoted image]