I picked up a hook and the laser kick is not working. I have checked for continuity in the wiring. I have checked the coil. Replaced the tip122 transistor. The coil will not fire in test mode either. Any ideas?

I replaced the coil and put in a new sleeve and spring. I haven’t tried to bridge it to ground.

Should that coil have 50v all the time? It didn’t but I might be checking the power incorrectly

Awesome. I didn’t have 50v to the coil so I’m guessing there is a wiring problem between there and the board. I’ll start there.

And the culprit is...... bad fuse clips. I should have known it seems like it’s always a bad fuse clip on these data easy machines.

Thanks for all the help