Hi all,
Just wondering if any of you Monte Carlo owners could help me out. Working on one with the two 67 flashers on the sides of the roulette wheel are lock on. For some reason I am having a terrible time deciphering the manual and can't figure out which transistor controls them. They have the main driver board and two aux driver boards. If someone could point me in the right direction, I would appreciate it
Thanks

Update, so I replaced u4, and z11-z14 and game is back up and running and switches work. Only things not working is the feature lamps in attract mode only. Lamps light fine in game play mode, which has got me baffled. Not sure where to go from here, so any help would be greatly appreciated
Game worked fine until I hooked up the #5 kicking target, that was previously disconnected by someone

I have a haunted house question, that I'm am hoping someone could help me with.
Number five kicking target (under upper playfield), had the wire from the coil to the switch disconnected. It was like this when I got the game. I hooked it back up and it proceeded to wipe out the switch matrix on the mpu. I rebuild it and got the game back up and running.
My question is, what can be shorted out? Everything looks good and is identical to the other kicking targets. Where would I begin to look for a possible short?