I have a couple good working 80Bs, a Big House and a Bone Busters. I was thinking of putting them on the marketplace but wasn't sure if there'd be any interest. What do you guys think?
You're currently viewing posts by Pinsider Zorak.
Click here to go back to viewing the entire thread.
I have a couple good working 80Bs, a Big House and a Bone Busters. I was thinking of putting them on the marketplace but wasn't sure if there'd be any interest. What do you guys think?
Quoted from Pinball-is-great:Hi parka,
I'm interested in Bone Busters. Is there any chance you are heading south this Fall/Winter to south AL/MS/LA/TX on vacation or for other reason?
No, I don't usually get down that way; I'm taking Bone Busters to York, and if it sells there I'll be taking an A13 to Expo but those are the only two shows coming up that I'll be at.
Thanks for the interest!
Looking for a good backglass for The Games... like most of them, mine is pretty well gone in the middle top half and has a bunch of amateur repair but it’s not completely gone. if anybody has one they can part with lmk, thx.
So is the jury returned on if you can run a NiWumpf CPU with Rottendog driver board in a System 1? I'm not finding a definitive answer & I've got a Sinbad with that setup that won't kick from the outhole despite a good solid 25v at the coil and good continuity from the driverboard to ground side. Not sure how to tab test a rottendog driver transistor in game with it running so I can't be 100% certain yet but wanted to see if I 'm chasing my tail with the NiWumpf in there anyway like it might not be communicating right with the driver board? Read something about lights not firing but wasn't sure if it could cause a coil issue too. It's an early NiWumpf too, a revision M with a 3 digit SR#. Thanks in advance to anyone who can shed some light on this for me.
Quoted from northvibe:I’m about to buy a pascal all in one and be done with it.
same here
Quoted from Biffbar:Is the display test ok? There might be a hardware problem.
yep test runs 100%. no garbage on the display at all during gameplay or when displaying scores 2-5
Still having trouble with these Spring Break displays— So I understand that the ram might be bad as to why there is garbage in the number one high score info, but now most of the time the display only flashes both glasses quickly on start up then goes blank, or it will work for a couple games and quit, or it just won’t light up at all on power up. Occasionally it will sit there working for about an hour and then just start throwing garbage all over both displays until I reset the game as well. I have rebuilt the connectors. Any ideas on where to go next?
Anybody got any kind of spare Raven translite? Would prefer an aftermarket if someone is switching back and selling but any will work, it's missing from mine. Also I will trade an SNS for a Stargate give or take, DM me let's deal! and I can travel, I'm in southern IN by Cincy. "motivated Gottlieb trader" --Lonnie
I also still have a Tee'd Off topper blockout plate if someone needs one.
Quoted from Spacemanratso09:but when it goes to the right it just hits off the plastic and comes back
Weird.
It works just not like supposed to[quoted image][quoted image]
I had one and it acted strange like that. Turned out the motor was stripped on that copy, but would still grab and move it to one side sometimes. as I recall I sold it without it working because I couldn’t source the motor at the time
hey all I just put a really nice Hollywood Heat cab in the marketplace in the parts section if anyone needs a better one.
You're currently viewing posts by Pinsider Zorak.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/home-for-the-gottlieb-sys1-sys-80b-guys-yep-i-guess-it-a-club?tu=Zorak and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.