Quoted from TwoHeartedMale:I need to replace the Bolts that connect the head to the cabinet on both my system 1 and system 80. I need to know the bolt size and length. can someone please help me out.
For System 80: 1 1/2” length, 3/8 x 16 thread
You're currently viewing posts by Pinsider Colsond3.
Click here to go back to viewing the entire thread.
Quoted from TwoHeartedMale:I need to replace the Bolts that connect the head to the cabinet on both my system 1 and system 80. I need to know the bolt size and length. can someone please help me out.
For System 80: 1 1/2” length, 3/8 x 16 thread
Having a few switch issues with the Arena I just picked up, and unfortunately it didn’t come with a manual.
My top left “K” rollover isn’t registering, nor is the “W” Wall drop target and the 3rd stand up behind the Wall drops.
Anybody know if those three switches are in the same circuit from the driver board? Or what switch numbers those three are? I’m getting a notice in test mode that switch 66 is closed.
Also, anybody know where to find any Pit plastics? It looks like this guy had broken ones and fabricated his own (not horribly done), but I would like originals if I can find them.
Any help would be appreciated.
6A0FAB28-FC0F-4F03-8231-394F28735940 (resized).jpegQuoted from JodyG:Got a chance to try my first ramp dye job...in Purple. I am going to try teal, and a pinkish red close to the factory color as well.
Looks great man!
If anybody knows of any Pit plastics or where to get some I’d appreciate leads as well.
Quoted from Colsond3:Also, anybody know where to find any Pit plastics? It looks like this guy had broken ones and fabricated his own (not horribly done), but I would like originals if I can find them.
Quoted from uncivil_engineer:1 PI-80 board
1 Sound/Speech board with SC01 chip (I’ll need ROM chips)
1 speech sound power supply board
1 aux driver board (off eBay possibility)
Have I overlooked anything?
Nope, that should be all you need.
You might want to grab one of their pop replacement boards too. They are awesome and way reliable. I think they combine shipping and discount multiple boards, so it wouldn’t hurt to have one of those on hand in case you need it.
Quoted from vonclod:Pascal does have an all in one board as well. I'm using their all in one for a system 1 game and everything works great
For Sys 80 games like black hole, you still need a couple original boards or their separate boards in combination with the Pascal MPU/driver/PSB board.
Quoted from MikeS:Does anyone have an extra working 7 digit display I can buy? Maybe left over if you upgraded displays?
One of the displays in my Alien Star went out. Pn: ma238 or C-21390.
I might have one, but not sure. I have a box of various displays. I’ll check either today or tomorrow and let you know.
Quoted from BorgDog:yikes!
Thanks for the link. Well now it’s obvious why somebody pried it off the board before my buddy bought it, and then trickled the board down to me.
Quoted from radial_head:Would highly recommend just buying a new S/S Board from Fred Swemmer. I just purchased one for my Black Hole, and it truly is a nice piece of work.
Yeah, probably just should’ve went that route in the first place. Already dumped $100 on this board.
I had Swemmer boards in my HH, and they were great. Although there was an issue with a few solenoids from his driver board. Original board fixed the problem.
You're currently viewing posts by Pinsider Colsond3.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/home-for-the-gottlieb-sys1-sys-80b-guys-yep-i-guess-it-a-club?tu=Colsond3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.