Creature from the Black Lagoon
Bally, 1992You're currently viewing posts by Pinsider phillyarcade.
Click here to go back to viewing the entire thread.
Just found the thread keep me in the loop as well I'd like one for my creech! My hologram is still green but I've love to see something more interactive. Like most said for the little time that thing comes on in multi ball it's almost not worth it! I see the creature more in attract mode!
Can't wait! 
Take all the time you need. Don't rush it. This table deserves the best for this project!
Can't wait to add this on mine! I'm blowing fuses now when my original hologram runs.. I had to unplug it probably one of the motors is going bad. 
Looks awesome keep up the good work! I can't wait to get this installed in mine when it's done. This also looks like a great mod that will only improve in time. Once some of the guys get this installed we'll be able to tweak it with you and make it over the top. All those who broke your chops in this thread about it not happening, make sure they go on the bottom of the first run list! 
I love popping in from time to time and checking the updates! Great work keep it up! Can't wait to add this to my creech!
Quoted from pinballsp:I think you can have it soon, we only have 6 videos left to fully finish the product.
CREATURE video finished. Music and special effects were added, quite a few corrections were also made in the second scene about the movements of the paw, the footprint it leaves and the insects.
We started working on the next video, which will be the FILM video, and there will only be 6 more videos to be done, really 5 since the left ramp and right ramp are the same with small variations.
We are very close to the end and the product will be completely finished and ready to be offered.
[quoted image]
I've been following on Youtube. I'm purposely not playing my creech hardly at all till your kit is finally complete. Keep up the good work well waiting for!
The delay on early release is he needs to sift through all 45 pages here and find all the haters and the "this will never happen" and block them from getting one of these kits!
Got mine installed tonight finally! Went very smooth. I had to use the external 12 volts. My 12 volts wasn't having it when I tried to hook it off the driver board. I did the complete kit so it was in there. There is a little board that came with it with some buttons on it for adjustments. Does that plug into the LCD monitor or the actual board in the backbox? I just didn't read that far. Other than that I love it!
51229655942_4dbaf87686_o (resized).jpg51229668867_a7a8befcca_o (resized).jpg51230373551_2c7774fc5d_o (resized).jpg51230572768_9acc00fa14_o (resized).jpg51230585418_8fbf55329a_o (resized).jpg51231129744_23f7ec088f_o (resized).jpg51231129804_c4c26701a0_o (resized).jpg51231129844_8c802be4c1_o (resized).jpg51231142839_bc8994eb1b_o (resized).jpg51231431265_70e66fbb70_o (resized).jpg51231431290_62d5242fda_o (resized).jpg51231443975_7a74783c67_o (resized).jpgQuoted from PoMC:The guy up above had game play video streaming on a Facebook group last night. I think his game also had a pin soundboard in it with custom music that made the stream sound really confusing and hard to follow what the game was doing but the animations on the screen looked excellent.
Yup that was me. My Creech has the PinSound mod as well. Facebook did kill most of the music on that video with their copywrite stuff so you can watch it like a silent movie now I'll try to upload some more game play on Youtube although I think they will block the music as well. But it does flow well with the game. This was one of the first batch and I bought the full package so I may have to update some videos and such but so far works great installs in no time.
Quoted from NYP:Seems no one wants to take a game play video
If you are on FB join my page and you can see the game play video I did on it. Not the best but gives you an idea. I'll upload some more. Remember to answer the questions if you join the page 
https://www.facebook.com/groups/325032398412487/buy_sell_discussion
Quoted from Timfenske11:The actual owners and buyers seem to be too busy enjoying their new mod.
yes! Creech is a harder pin as it is and now trying to watch the videos and play makes it even harder!
Quoted from NYP:Seems no one wants to take a game play video
I made a few vids today and upload them on my youtube page (youtube upload turned 2 of them sideways on me) have a look here...
https://www.youtube.com/channel/UCbi2EhnPXUzvgbD1PZHDfWw
of course I played like shit while making the vids. I played a few games with no camera and kicked butt! Go figure! Either way great mod I love it and since my hologram was blowing fuses and I've had it unplugged for ever, this is refreshing for me!
Quoted from robertmee:Thanks for the videos. Mod looks pretty good, but on the video where you show the DMD, it certainly emphasizes the limitations of using the lamp matrix as the event handler. Many times, the video didn't sync with what was going on in the game. Many instances that the car honks and there is a drive-in scene on the DMD aren't captured because presumably there was no lamp event associated with this mode. All in all, still an impressive achievement and gives those without functioning holograms an option. But room for improvement on the event handler.
I think his update will fix most of that. That's the beauty of it. It's out now so he can get feedback and tweak where needed. Mine was one of the first ones to ship from me pestering him so much But this thing has tons of room to grow that's the nice part!
Quoted from pinballsp:Thanks for posting your videos.
I suggest you update the firmware to the latest version. Those flickers with multiple videos when shooting the SLIDE, in the right hole, were corrected long ago. Now the FILM video, when shooting SLIDE, is triggered cleanly, without flickering or other videos that appear quickly (right ramp shot and others from FILM). This suggestion is applicable to all first batch users who will have this bug, fixed already in the current firmware version.
Update only the blue board firmware to fix that issue.
https://github.com/pinballsp/Creature-HOLO-ModSP/tree/master/firmware
Or you can wait a little longer because I am going to release version v1.2.1 shortly, which adds two more videos, the "Video Mode" and the "Creature & girl". In addition I will include some improvements in the firmware, faster boot time and trigger time of the video FILM (4 letters on) also faster.
[quoted image]
Thanks for the post! I might wait till the new firmware comes out and dump it all on there. This is great feedback in the field for you so keep on making it better and I'll keep posting and playing it! Such a great mod!
Quoted from NYP:I have to admit, it took forever, and I didn't think he would ever finish, but the damn thing looks great! Thanks PhillyArcade for the video, I bet you helped sell a few more. I am seriously considering buying this now....
I knew I should have taken stocks in this thing! 
It really brought new life to my creech. I fell in love with creech first time I played it. My hologram kept blowing fuses and I didn't want to dig into tracking it down and seeing what it was and then this project came along so I really forced myself not to fix it! Now my still green hologram can sit in a box in the bottom of the game forever!
You're currently viewing posts by Pinsider phillyarcade.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hologram-mod-for-creature-from-pinballsp-is-under-development?tu=phillyarcade and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Naples, FL