The Hobbit
Jersey Jack, 2016You're currently viewing posts by Pinsider xbloodgreenx.
Click here to go back to viewing the entire thread.
Quoted from Nappis:Are there any instruction how to remove main ramp properly? Quite hard to wax without removing it.
you really really don't want to take the ramp assembly off if you don't have to. I had to do it to replace the ramp flaps and that was one too many times.
My beast-mechs seem a little out of alignment. When the closed the upper trap doors don't lay flush, causing some air balls. What's the best way to adjust how they lay when closed?
Quoted from wolv3:Thanks, that's how I cleaned them out just wanted another opinion. For the sleeves is it one size fits all?
There are different sized sleeves for different sized coils. Definitely make sure you are getting the right one. http://store.jerseyjackpinball.com/Parts/The-Hobbit-Parts/Sleeve-Filpper-Inner.html
You're currently viewing posts by Pinsider xbloodgreenx.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hobbit-setup-tweaks-and-adjustments?tu=xbloodgreenx and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Los Angeles, CA