Quoted from KingBW:This is for screaminr from the question in the JJPOTC club thread …
For connecting TH to a external sub, I used what Pinnovators recommended and it works great. First I bought an RCA splitter for the sub connection at the back of the box from Amazon, then a RCA to STEREO 3.5mm adapter at monoprice:
https://www.monoprice.com/product?p_id=7241
[quoted image]
then used the Pinnovators 3.5mm stereo cable and routed that out through the back under a small access plate (that no one knows what it is for) that has the 4 screws (just pinched the wire casing a touch with it so that it wouldn't get accidentally pulled), then to the Pinnovators sub splitter.
[quoted image]
I had bought 5 of those monoprice adapters because they were cheap but had questionable reviews - all 5 worked. Pinnovators said that they never had or heard of a problem with them. Their theory was that it was best to have the sound coming from both a RH and LH audio channel. I have that setup with the adapters for both my WOZ and TH and the sound is great.
If nothing else it can give you an idea of what to do. I see that the monoprice RCA to 3.5 stereo is out of stock until 10/25, so if you want one I will bring one to Expo with me and give it to you for 50 cents. I don't have another extra RCA splitter though. Let me know ...
Hi All:
I have what I believe to be an easier method.
instead of the splitter and near the same location there is an auxiliary 3.5mm stereo output jack. see picture. Buy a 3.5mm stereo to RCA cable and run that down to your sub and you are done. Although using the splitter method works, the RED RCA cable on the back of the JJP module has a low frequency filter. Since pretty much all active external powered subs have their own frequency adjustment you would want an unfiltered line out such as the aux 3.5mm jack. This way you can tune the frequency of your sub to your liking. The other two attached RCA cables on the JJP module go to the back box speakers and have a high frequency filter so likewise you would not want to use that either.
3_5_jack (resized).jpgcable (resized).jpg20190315_161301 (resized).jpgmachine (resized).jpg