The Hobbit
Jersey Jack, 2016You're currently viewing posts by Pinsider muttonboy.
Click here to go back to viewing the entire thread.
Received mine yesterday, today my upper flipper quit working.
Looks like if it was a driver or fuse more than just that flipper wouldn't work. Dragon diverter right next to it is working fine.
If it was the cabinet switch, it'd still work in test. Anything left I should be looking at before I resolder the coil, and replace if it doesn't work still?
Quoted from LTG:Please go into Tests - Dedicated, and slowly push the right flipper button in. First lower should register on the screen, then the upper.
Most likely you just need to adjust the one farthest from the flipper button.
LTG : )
hey thanks for the quick response lloyd! I haven't been able to get the jjp ticket thing to send me the email to verify my account figured it was after hours likely and I would call tomorrow if needed.
the cabinet switch is working great, coil won't fire in coil test either. the coils wires go from the coil straight to J107 on the i/o board it looks like, correct?
Quoted from LTG:Yes.
LTG : )
thank you sir.
I've got continuity from the plug J107-9 & J107-10 to the coil lugs themselves, and I have the same ohms between coil lugs as the other coils in the machine @~140. Can I assume the coil is fine or did I need to remove the coil from the machine to determine?
I think all thats left is the Q337 & Q338 which is out of my comfort zone to replace.
I did send an email to techsupport, still haven't gotten into the portal. I'll give them a call once everyone is up and around here.
Quoted from muttonboy:thank you sir.
I've got continuity from the plug J107-9 & J107-10 to the coil lugs themselves, and I have the same ohms between coil lugs as the other coils in the machine @~140. Can I assume the coil is fine or did I need to remove the coil from the machine to determine?
I think all thats left is the Q337 & Q338 which is out of my comfort zone to replace.
I did send an email to techsupport, still haven't gotten into the portal. I'll give them a call once everyone is up and around here.
I'm good, Vic's on it.
You're currently viewing posts by Pinsider muttonboy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hobbit-owners-thread?tu=muttonboy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Muir, MI