My D(W)arf and E(L)f drop targets will intermittently get stuck down with the switch stuck on. When the machine calls for the coil, they just wiggle slightly (or don't move at all) and I do not hear the coil fire. Usually they work during test mode, and when I start a game they eventually stop working part way through. Sometimes they will resolve themselves during play as well. Typically during a full-reset of the drop target bank.
Wondering if any of the below will fix the issue:
1) Adjusting Nylon screws (drop targets seem to be at the same height as all others though)
2) Replacing coil sleeves (they are looking a bit dirty and don't actuate very smoothly, but don't think they would cause this)
3) Bend drop target/switch slightly somewhere?
Any tips from people who have experienced similar issues would be appreciated - thanks!
Bonus issue: My invisiglass seems to have been cut incorrectly, because the lockbar will not close properly due to one side of the glass being much longer than the other. Tried rotating in all directions, doesn't fix the issue. Couldn't find a single other person who has this issue...
EDIT: Resolution: Removed drop target assembly, cleaned all coil sleeves, screwed in nylon screw in bottom of problem targets slightly, bent drop target back slightly.
After a few games it seems to be working. Thanks everyone who suggested fixes.