I recently picked up a high speed(first pin!). It needs some love and while going through and replacing the rubbers and assessing what needs worked on first I noticed the entrance of the ramp didn't sit flush with the playfield. I've tried to find photos of a stock ramp installed to see if this was correct or not. I might just be paranoid but for everything I've seen about uneven inserts being a problem it feels weird that a major part of a pin would sit above the field like this especially since the entrance is metal. I attached a photo of the ramp entrance, the lighting isn't great but you can see what I'm talking about. Am I overreacting? Is there a way to mitigate ball wear in this situation?

IMG_20180530_214058 (resized).jpg