So,untill I'm ill for about 2 months I decide to make some additional mods to my favourite pinball High Speed.The idea is:
I will make little police car light bars and will put it on the gates-1,2,3
http://i891.photobucket.com/albums/ac119/arakissun/image-20.jpg
On gate 1 the lights will work together with the blue flash lamps on left side of radar detector.So when the blue lapms blinks,the lights on gate 1 will blink too
On gate 2 the lights will work together with the blue flash lamps on rights side of the radar detector.So when the blue lapms blinks,the lights on gate 2 will blink too
On gate 3 the lights will work constantly like the movie down below
I make some pasteboard models from cigaret box(the final version will be from transparent plexiglass with colour blue and red sticker on it).Make barrier(empty space in the center) between the lights from pasteboard too to not mix the colours
http://i891.photobucket.com/albums/ac119/arakissun/Picture004-4.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture003-5.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture005-5.jpg
Buy ready circuitry that make two leds blinks one after one.The original was with two round 5mm LEDs,as you can see I replaced them with two red and two blue little SMD LEDs.
I make base and wired them.
http://i891.photobucket.com/albums/ac119/arakissun/Picture002-7.jpg
So the temporary results
http://i891.photobucket.com/albums/ac119/arakissun/Picture006-4.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture008-2.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture010-2.jpg
Movies