(Topic ID: 259717)
Linked Games
High Speed
Williams, 1986
Topic Gallery
Cupertino, CA
Melbourne, ON
Quoted from detroitzoran:Installed with a splitter https://imgur.com/9fJXNOG
RobF you did an awesome job with this light.
Looks great with the red ramp, can't wait to get mine!
1 month later
Quoted from CanadianPinball:Is the Y harness ever going to make it to the market?
I would be buying if the harness was produced!
2 months later
Still loving my yellow stoplight. MY High Speed is all back together and thought I would post a photo. Anyone thinking for replacing the clunky OEM stoplight, This is the one to do it with.
PLUG-N-PLAY
Great product and very well designed.
IMG_0749 (resized).jpgQuoted from Pin-Pilot:Still loving my yellow stoplight. MY High Speed is all back together and thought I would post a photo. Anyone thinking for replacing the clunky OEM stoplight, This is the one to do it with.
PLUG-N-PLAY
Great product and very well designed.
[quoted image]
Thanks for the kind words! I am glad you are enjoying it. I have been following your HS restore thread and it really turned out great.
Quoted from Pin-Pilot:Still loving my yellow stoplight. MY High Speed is all back together and thought I would post a photo. Anyone thinking for replacing the clunky OEM stoplight, This is the one to do it with.
PLUG-N-PLAY
Great product and very well designed.
[quoted image]
Much agreed
I was thrilled with the one I received from Rob also.
F402F184-11DE-4106-BD9F-26AC6CD306E2 (resized).jpegQuoted from RobF:Thanks for the kind words! I am glad you are enjoying it. I have been following your HS restore thread and it really turned out great.
You obviously put a lot of work into this stoplight. The Circuit board is like it was factory made. It is just nice to see a product that is well made.
Quoted from High_End_Pins:Much agreed
I was thrilled with the one I received from Rob also.
[quoted image]
I was happy to see that you went with the RobF stoplight. I was a little surprised to not see a new ramp from
Freeplay40 however. I assume the owner wanted black to go with the theme. Or maybe you made the command decision.
Quoted from High_End_Pins:Much agreed
I was thrilled with the one I received from Rob also.
[quoted image]
Thanks Chris. That means a lot to me coming from somebody with such an unhealthy focus for quality 
Quoted from CanadianPinball:robf Still waiting for the extended harness to show up in your store.
I’m also hoping he sells a splitter .
1 month later
2 weeks later
I buy add-ons all the time and frequently don’t install them due to lack of time. Sometimes I buy the same mod twice because I forgot that I bought it the first time. Oh well. Finally installed this very cool mod on my High Speed tonight. Easy install. Looks great! Looks better in real life than this pic shows.
HSStopLight (resized).jpgQuoted from ChrisHibler:I buy add-ons all the time and frequently don’t install them due to lack of time. Sometimes I buy the same mod twice because I forgot that I bought it the first time. Oh well. Finally installed this very cool mod on my High Speed tonight. Easy install. Looks great! Looks better in real life than this pic shows.[quoted image]
Thanks for posting Chris!
Quoted from ChrisHibler:I buy add-ons all the time and frequently don’t install them due to lack of time. Sometimes I buy the same mod twice because I forgot that I bought it the first time. Oh well. Finally installed this very cool mod on my High Speed tonight. Easy install. Looks great! Looks better in real life than this pic shows.[quoted image]
Yes, One of the best mods for High Speed!
HUGE Improvement over the stock black box. Works and looks flawless!!
Even my wife who could care less about my machines noted how good it looked!!
Quoted from Canuck_pinhead:HUGE Improvement over the stock black box. Works and looks flawless!!
Even my wife who could care less about my machines noted how good it looked!!
Appreciate the feedback!
Better pic...
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
53E86CB9-B6FD-4D12-91C6-EB2414CB2E81 (resized).jpeg 1 month later
Finally added the option for a Y-splitter for those who want to relocated the original stoplight to the left rear corner. https://pinside.com/pinball/market/shops/1252-robtune-/03631-high-speed-led-stoplight
PXL_20201123_000953037 (resized).jpg
Rob,
I’ve had folks ask me to make splitters for them. Would you offer a splitter for the folks who already purchased the “non-split” lamp? If so, I will point them at you.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
Quoted from ChrisHibler:Rob,
I’ve had folks ask me to make splitters for them. Would you offer a splitter for the folks who already purchased the “non-split” lamp? If so, I will point them at you.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
Yeah that would be easy enough. Thanks Chris. You can point them to me. PMs or emails are fine until I get it added to my Pinside store.
Will do.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
1 week later
2 months later
Finally installed this stoplight in my High Speed over the weekend. It looks and works great. So much better than the original and looks great with the game. Good job!
Quoted from LouMatt:Finally installed this stoplight in my High Speed over the weekend. It looks and works great. So much better than the original and looks great with the game. Good job!
Thanks for the kind words. I am glad you like it.
As a general request, I would appreciate feedback also posted to my profile page as well;
https://pinside.com/pinball/community/pinsiders/robf/feedback
5 months later
1 week later
2 years later
2 months later
Quoted from RobF:Thanks for the kind words. I am glad you like it.
As a general request, I would appreciate feedback also posted to my profile page as well;
https://pinside.com/pinball/community/pinsiders/robf/feedback
Are you still making these?
Quoted from cjzachmann:Are you still making these?
I believe that he is. Here' his website:
https://www.robtune.com/product-category/pinball/
Quoted from RCA1:I believe that he is. Here' his website:
https://www.robtune.com/product-category/pinball/
Indeed! Thanks for sharing the link.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
