OP

Quoted from Jared1862:

That fuse was bad, so now the hideaways fire!
However, I still have a mess. I bought this at an auction pretty cheap, now I know why...
The previous owner replaced both flipper coils, two pop bumpers coils (neither look to be the correct coil). Also he added diodes in an unusual way, or at least to me.
When I run the coil test now the below do not fire: (Which is now two less then before)
Left Kicker 17
Right Kicker 18
R. Jet Bumper 19
LL Jet Bumper 20
UL Jet Bumper 21
Top Flasher 22
Lastly, there is some damage on the board where the transistors are on J19. So I will most likely send the board in for repair.
I think my problem is due to some bad transistors and possible board damage. However I am not sure what caused it...
Also, I still have no idea why the flippers aren't working, unless it has something to do with J19, where all the damage is done.

OP

Quoted from Jared1862:

Yes, I agree. I am going to replace all of the diodes and lose the telephone wire.

There is a separate board, and the fuse is good. You are correct, there is a fuse for the special solenoids, and that is good as well. I do think it is odd that none of the fuses blow.