Nice project!
Quoted from RandyW:Good point. I will have to look further into that, but I think it would be worth it.
Which hardware platform do you plan do use? Looks like this is a System 11 machine. There are multiple options (http://docs.missionpinball.org/en/dev/hardware/index.html):
- Snux board + P-Roc (http://docs.missionpinball.org/en/dev/hardware/snux/index.html) -> Replaces the CPU. Reversing flippers would not work easily
- APC (http://docs.missionpinball.org/en/dev/hardware/apc/index.html) -> Replaces your driver board and CPU. Reversing the flippers would not work out of the box. It might be possible to do this in software in APC (
AmokSolderer might be able to tell something about that)
- Rewire the machine and use modern control system such as P3-Roc, Fast or OPP -> Everything is possible
Jan
Dunakeszi
Orange, CA
