@Grumpy. There seems to be a problem with the sound roms at about 1:05 of the video. Might want to check that out.
You're currently viewing posts by Pinsider zosofan.
Click here to go back to viewing the entire thread.
@Grumpy. There seems to be a problem with the sound roms at about 1:05 of the video. Might want to check that out.
I just picked up a couple of sets of these:
ebay.com link: Williams high speed pinball machine cap set
Quoted from PinballAir:Anyone have a nice HS pop bumper cap for sale.
I realize after some time on pinside that everyone's definition of nice is slightly different.
So, I would like to buy a cap that has no chunks missing, no bulb burn, and only small scratches.
PM me if you have one to sell.
Quoted from KSUWildcatFan:Not super thrilled with my execution on these but it is what it is. I should have slowed the Dremel down when I got close
That is the part that freaks me out the most about attempting this.
So....
My High Speed has been down for a couple of years and I decided that I should start working on it.
The bridge rectifiers have never had fuses added to them, so I figure this will be an easy place to start.
I installed my fuse holders, made some jumper wires and go to pull the wires off of the bridge rectifiers.
I am pulling and pulling and they will not come off.
I get out the camera to get a better look and found this:
The previous owner soldered the push on connectors to the bridge rectifiers.
IMG_7064 (resized).jpgIf you find a source, I am looking for one too. Thinking about modding this area and pulled one off my parts machine. It is a little rusty and it would be nice to have a pristine one.
eye thank ewe
zosofan
Quoted from wamonkey:Question - does anyone know if the speaker panel stainless steel trim pieces are available anywhere (not backglass trim - that is widely available).
Starting to build up parts for my HS restore and mine is bent a little bit and would like a nicer set. There is one little trim on the bottom and kind of a U or H channel on top of the speaker MDF panel.
You're currently viewing posts by Pinsider zosofan.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/high-speed-club-dispatch-this-is-504-we-have-a-club-now-over?tu=zosofan and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.