Hello everyone....great to see all the support here for High Speed.
I'm so excited. I'm suppose to have my first pinball machine delivered today. I'm excited to say its a HIGH SPEED pin.
I will post pictures once it has been delivered. I have played this pin since I was a kid.

Looking forward to getting to know the pinball machine inside and out.
I love some of the mods I have seen in the forum. Especially the clear ramp with road stickers.
FreePlay40 - I hope you still have some for sale. I tried to find some links but couldn't find the link to the stickers for the bottom
of the clear ramp. If someone has the link to the stickers and stop light mod cover (yellow) that would be great.
It sounds like FreePlay40 has the mod for re-location to the back left.

Thanks!
HS1STPIN

Awesome Thanks FREEPLAY40.

Can anyone please tell me how to separate the backbox from the main base? I can't get the pinball into my room upstairs.
I have looked and can't seem to figure it out. I also see a key/lock on top next to the red flasher. What is that for?

Thanks for the quick responses.

HS1STPIN

Great thanks. Now I just need the correct key. They one that was sent does not unlock it.
Thanks for the quick reply!

Thanks to everyone for the quick replies. I was able to find the correct key and get the backbox off so I could fit it through the door.
Here are some pictures of the Pin. Pretty good shape for its age. Cabinet is a little rough around the edges but I will touch up with some black paint.

Playfield looks to be in great shape. Looks to have the protective sticker on the playfield. Do you all think its ok to remove that and put down a new one? I wanted to make sure when taking off the old one that it doesn't pull the paint off the wood playfield.

Will send pictures tomorrow.

Thanks again!!!!

Here are some pictures of my machine as promised in a couple replies back.

Does anyone know what the lamp socket is called that is in the back upper left of the machine?
The lamp does not come on and I have tried a couple different bulbs. However I put a LED in there and it lights up.
If I can replace the socket please advise where you could get one. (See Pic)
So not sure if the socket is bad or what. Also the freeway lights (stars in the corners don't light up. I couldn't seem to see the bulb when I lifted up the playfield.

Thanks,
HS1STPIN

Bulb-pic (resized).jpg

Pic-1 (resized).jpg

Pic-2 (resized).jpg

Pic-3 (resized).jpg

Thanks for the info. I was able to catch them flashing. I appreciate the info!

HS1STPIN

That looks really good. Please let us know if you get it hooked up..fitted and working. I will buy one!

HS1STPIN

Does anyone have a NOS or used Center Playfield Plastic piece?
The one above the R_Y_G targets just north of center or in front of the first pop bumper?

I can't find any playfield plastics for sale. There is some on ebay but not the one I need. HA!

Thanks!
HS1STPIN

Just thought I would share some pictures of my restoration of my cabinet on my High Speed Pin.
My decals came in yesterday so I tackled the left side and front of the machine today. Nothing beats the ease of
vinyl decals! It turned out awesome. Of course you can't just stick them on. I prepped the side and front and filled
in any bad spots with wood filler and then sanded it down.
I took also cleaned up the silver side rail while I had it off. Next is the back box and right side of the machine.
I will post pictures when finished with those.

Thanks!

Front-After-Decals (resized).jpg

before-front (resized).jpg

After-Decals-Left Side (resized).jpg

1-Before-Prep-Left Side (resized).jpg

Here is the left backbox finished. Painted the whole back box satin black and then applied decal.
Front of machine with new plunger.
Target Pads installed. Doesn't effect gameplay but does keep the ball from going crazy. Looks good as well.

Next is to tackle right side cabinet and back box.

Thanks.

Target-Pads (resized).jpg

Front-Newplunger (resized).jpg

leftside-back-box (resized).jpg

http://www.retrorefurbs.com/shop/high-speed-pinball-cabinet-decals/

Yes. The transaction went very smooth. The Decals are very good!
As you can see they look great as well. Nice and thick and easy to install.

Is it possible to increase the Jackpot amount limit? The limit is 2,000,000.

Thanks!!!

I think it was a different website. I will try to find it.