Quoted from Clizifer:they are 12v dc leds. i think they can run on 9-12v tho. could i hook them directly to the beacon?
If you buy a cube 12 volt relay and connect it in parallel with the beacon relay in the back box with these Y connectors on the #85 and #86 terminals and a pair of jumper wires. Connect relay terminal #85 to terminal #85, connect relay terminal #86 to terminal #86.
Then get your positive 12 volts from the power supply connector 3J6 pin 3, connect this to terminal #30 on the new relay. Then connect #87 terminal of the new relay to the positive of your leds. Get the negative 12 volts from the same connector 3J6 pin 15, run this down to your leds negative.
pasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).png