I just bought a high speed. The game seemed to be working fine then I saw the green and black wire on the cpu board for the switches was disconnected. When I hooked it up the game now tilts when you hit a pop bumper. Ant ideas anyone? Thanks Bill By the way this wire does run to the pop bumper switch.
Thanks I will try Grumpy. The reason I put the wire back on the connector is because the schematics shows it hooked up. I also said it seemed to be working fine because I never had a High Speed and do not know exactly what it is supposed to do,sorry for the confusion on my original post.
Didn't want to seem like a dick. I apologize if it came across that way.
On electrical things, I generally will not fix it if it is not broken.
Quoted from willie0912:I just bought a high speed. The game seemed to be working fine then I saw the green and black wire on the cpu board for the switches was disconnected. When I hooked it up the game now tilts when you hit a pop bumper. Ant ideas anyone? Thanks Bill By the way this wire does run to the pop bumper switch.
Yes ask in the High Speed thread. Looks like you have a switch matrix issue of some kind. Go into switch test and see which ones are incorrect and report back.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/high-speed-6 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bartow, FL