Getaway: High Speed II, The
Williams, 1992Hey all. I noticed recently that the opto when you enter the supercharge ramp is non-functioning. (The 2nd opto on the actual loop is fine). Wondering where to start. There’s no obvious wires crossed or disconnected. How do I determine if I have a bad opto or if it’s a problem on the boards? Thank you.
2E58808C-8DF1-4549-829D-20071DCB5D0A (resized).jpegDoes it respond in switch test?
If it once worked and now doesn't, and there's no broken or disconnected wires, one of the optos has failed.
For some reason I can't edit the last post.
Optos are so cheap, I'd replace them before troubleshooting the board. That will help you narrow it down.
Quoted from dearliza98:drsfmd thanks for the help. I replaced the ramp entrance optos and all is well.
Glad you’ve got it working!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/high-speed-2-getaway-opto-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Nashville, TN