(Topic ID: 285270)

High roller casino switch errors on reports

By crobby

1 year ago



Topic Stats

  • 4 posts
  • 2 Pinsiders participating
  • Latest reply 1 year ago by crobby
  • No one calls this topic a favorite

You

Linked Games

#1 1 year ago

I recently got a #hrc and it plays great, but when I turn it on, it claims that there are 2 switches with problems (numbers 21-Ace of diamonds standup and 36-middle ramp, left entry). In the switch tests, both checkout just fine and they both work fine during game play. Part of me wants to look the other way since the game works and we enjoy it as is, but there is another part of me that must fix all things.
I've reseated the connector on the board, but see the same results. Anyone have any other things I ought to consider, or perhaps be another vote for, 'just play and enjoy it"?
Thanks

#2 1 year ago

I bet that the stand up could be a connector issue or perhaps you need a new switch. They are pretty easy to swap out of the assembly

https://www.pinballlife.com/desegastern-modular-switch-pcb.html

The 36 error was happening on my machine as well. I needed to bend the actuator arm a bit so that it was triggered during game play. It took several tries but I got it dialed in.If it works manually that is probably just an adjustment issue.

Good Luck!

#3 1 year ago
Quoted from QuietEarp:

I bet that the stand up could be a connector issue or perhaps you need a new switch. They are pretty easy to swap out of the assembly
https://www.pinballlife.com/desegastern-modular-switch-pcb.html
The 36 error was happening on my machine as well. I needed to bend to actuator arm a bit so that it was triggered during game play. It took several tries but I got it dialed in.If it works manually that is probably just an adjustment issue.
Good Luck!

Thanks, I'll give it a go.

#4 1 year ago
Quoted from crobby:

Thanks, I'll give it a go.

Seems like maybe a slight adjustment to 36 has made it happy for now and reseating the connector on 21 under the playfield may have made the difference for me. Both warnings have gone away at boot time.

Thanks for the pointers.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside