At least all the hacked mechs should be available to buy these days.
You're currently viewing posts by Pinsider lordloss.
Click here to go back to viewing the entire thread.
Quoted from High_End_Pins:Floor is unmasked [quoted image]
There are some small screw holes that need to be filled for a nicer look. These are from that power box mod and who knows what else ?
[quoted image][quoted image]
Since it is MDF I mix some oak wood dust with wood glue and wipe them [quoted image]
[quoted image][quoted image]
After it dries I sand it and they are camouflaged in and will be unnoticeable once the cabinet is built back up.MM traditionally has a bit of an oversprayed floor so I could go that route as well to further disguise it but knowing where the cabinet sheet goes etc no need at this point.
[quoted image]
Have you ever cut the old MDF out and put a new piece in? I assume you'd need to cut the back dado part of the cabinet out and hack the old piece out.
Quoted from High_End_Pins:Final needed parts back from plating. I did have a spare moat popper plated.
Wondering if I should swap it in here for MM 1?
[quoted image][quoted image]
How much does plating cost per machine on average?
Quoted from High_End_Pins:MM 1 playfield is ready to build this game in general is going back close to stock with stainless trim so we will continue that style of build on the playfield
[quoted image]
This is what I could salvage or have added to and tumbled from MM 1
[quoted image]
I grained(and straightened) the ballguides earlier this week
[quoted image]
I never thought I'd see the day that most of the parts pictured are available to buy:
pasted_image (resized).pngpasted_image (resized).pngQuoted from Jarbyjibbo:Yea I was thinking that those PF service cabinet protectors might be a nice one time purchase as insurance against screwing up the inside of the cabinet (or the top of the outside of the cab/rails if present) while removing/installing the pf.
Terry has them for $35: https://www.pinballlife.com/index.php?p=product&id=4575
When HEP has his own cabs made, might be easier in the end to make the cabinet 1/8" wider and avoid any and all playfield scuffing problems. (when raising and lowering, might not help as much when installing the pf.)
Quoted from LTG:Below the damsel tower in the right rear of the playfield.
LTG : )
But is there a part number for it?
Quoted from LTG:Not in the manuals.
https://www.marcospecialties.com/pinball-parts/04-10995
LTG : )
Thanks Lloyd!
Quoted from High_End_Pins:Send them back with the game,toss them or save them for a rainy day.
[quoted image]
I'd buy a roached TAF pf for the right price if you have a spare. Looking for some wall art.
You're currently viewing posts by Pinsider lordloss.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/hep-presents-a-tale-of-two-medieval-madnesses?tu=lordloss and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.