Quoted from robertmee:Bad coil or diode would be my guess...have you tested both?
And probably bad transistor/etc on the driver board, since it won't even fire unless you ground it
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Quoted from robertmee:Bad coil or diode would be my guess...have you tested both?
And probably bad transistor/etc on the driver board, since it won't even fire unless you ground it
Sounds like your switch isn't registering. Clean it with a business card, make sure it's closing, check the diode, etc
Quoted from robertmee:Take all the balls out of the game. Go into switch edge test mode. Roll each ball into the trough and see if the switches all register correctly. Also check the shooter lane switch with a ball. It sounds like the game is not seeing the ball drain, which would be the first switch in the trough. When this happens is the game advancing the ball on the DMD? As a test, go into two player mode. Let player 1 drain...Does it recognize it's player 2's turn and kicks out a ball?
This isn't a DMD game. There's only one ball and one switch.
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-special-solenoid?tu=zacaj and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.