You're currently viewing posts by Pinsider Fordiesel69.
Click here to go back to viewing the entire thread.
All voltages are perfect, old original boards boot and work fine, just some switch matric issues.
Per the directions the test rom boots if all of the DS3 are set to down. The LED;s flash as they should and SW1 makes the LEDs go on a off per the directions. However once I proceed to jumpering to my FLASH it will not boot, both LEDS lock on and nothing shows on displays. The battery is removed.
Not sure what to do next.
Stupid directions, and me being fixated on the word "OPEN" on the dipswitches was the issue.
See I grew up overclocking AMD motherboards and CPUS all the way back to the K6 series. The dip switches were always down for 0 or OFF. And up for 1 or ON.
On this MPU the word OPEN is stamped in small letters on the bottom of the dip switches, and on this board OPEN is a 1 and CLOSED is a 0. To me this is not logical. To the engineers maybe it was. Of course I had it switched exactly the opposite.
You're currently viewing posts by Pinsider Fordiesel69.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-new-rottendog-327-4-mpu-no-boot?tu=Fordiesel69 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
