Recently purchased a Getaway (good not great condition). Played it for several weeks and decided to replace the 8 or so bulbs that needed replacing. When I finished with the bulbs the left flipper didn't work so I checked the fuses and it had a blown fuse so I replaced it as well. When I turned the machine on after replacing the fuse the display got bright and the machine shut off. Now I've got nothing. No lights on the boards, nothing. Not sure how to approach. Hopefully someone can help. Jerry

Fuse in Main Cab was blown. Yes, fuses were identical. Update: Replaced the 5A fuse in Cab as it was blown. Now when I turn on the machine the display is garbled and all of the flippers activate. I shut it down immediately. Something not right.

Took all of the connectors off of the Fliptronic board, Cleaned, reconnected. Machine booted but there are still issues. See picture attached.

IMG_2182 (resized).JPG

5A is what I pulled out.

Perhaps the display is going out?

WeirPinball: 220 would make sense as this machine was originally exported to France.

Cycloneman: Thanks for the tip. I'll remove the cables, clean and reset.