I've had my Iron Maiden Premium since launch ( running on latest code ) and when I hit either flipper button it is acting like a ball is hitting the ORB. Also I cant select a song, when I hit either flipper ot does not move left or right. It just collects the orb and starts the ball in play. I've updated the code and it was no help. In the switch test when I push the left ot right flipper ot shows the clairovoyent is being activated.Here is a video, not sure where to look.
Quoted from LTG:I'd go into switch test and bang on playfield, any switch that registers needs adjusting so it isn't so sensitive.
LTG : )
I'll bang on it, I shook the cabinet and it didnt register.
You need to go under the playfield and adjust the orb switch mechanism. The post that activates the switch probably needs to be tightened and secured with blue locktite so it doesn’t unthread again. And/Or you may need to open the switch gap slightly.
Quoted from luckymoey:You need to go under the playfield and adjust the orb switch mechanism. The post that activates the switch probably needs to be tightened and secured with blue locktite so it doesn’t unthread again. And/Or you may need to open the switch gap slightly.
Happened to me out of the box. The latter solution above fixed it.
Quoted from luckymoey:You need to go under the playfield and adjust the orb switch mechanism. The post that activates the switch probably needs to be tightened and secured with blue locktite so it doesn’t unthread again. And/Or you may need to open the switch gap slightly.
Exactly this. Had the same issue and opening the switch slightly fixed it!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-iron-maiden-premium-flipper-buttons-are-setting-off-the-orb?hl=beyndtstng and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Hopkins, MN
Mt Martha