Try Pinball Resource. That is common Bally tilt hardware.
You're currently viewing posts by Pinsider skidave.
Click here to go back to viewing the entire thread.
Quoted from Spyderturbo007:I'm beginning to thing this is getting way over my head. SCRs, LDUs, Transistors, Resistors, Diodes, etc. I'm not an electronics guy, so perhaps it's just better for me to find someone to handle this issue.
I'll just try and find the thing for the tilt bob and stop there. It would take me 2 hours just to figure out what to buy and how many of each. Even if I got that far, I'd just sit there and stare at the parts wondering what to do with them or where they even go.
I appreciate the help, but I don't have 12h to learn how to rebuild a display drive board.
I'm in York if you want a hand. I have a capacitor for the tilt if you need. I also do board repair. Let me know.
Dave
Also, many times SCRs can test good, but they are actually bad. Not quite a transistor. Also, sometimes they are weak...meaning they don't conduct fully and the bulb looks dim. You can clean the bulb sockets many ways. Bally lamp sockets are notorious for being bad after many years. Not sure about the Stern quality.
PM if you want local help.
Thanks
Quoted from Spyderturbo007:A big shout out to Dave for inviting me into his family's home and working on my boards for me. He replaced all the header pins on the lamp driver board and taught me how to do it so I can handle things like this in the future.
I just wanted to give him a big public Thank You for taking the time to help a stranger.
Yes, I have a new friend Happy to help.
I took a look at the sound card schematic just now; needed a brain break from work. Order the cable and we should order caps. Then we can troubleshoot more if needed.
Quoted from Spyderturbo007:Next time we are going to play some pinball though!!
Looks like I can just get this and it has everything I need?
https://ksarcade.net/stn-sb300-capkit.html
Yes and Yes
You're currently viewing posts by Pinsider skidave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-ali?tu=skidave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.