You're currently viewing posts by Pinsider atari_daze.
Click here to go back to viewing the entire thread.
Quoted from Spyderturbo007:Does mine need that red thing with the long leads on it
That is a capacitor, yes you should put a new one on there, .05mf (or .047mf disc capacitor) 50V
Readily available any pin supply house or electronic store.
These from Ed would be fine:
https://www.greatplainselectronics.com/proddetail.asp?prod=CCD-0.047uF-100V
digikey.com
mouser electric
If your going to be putting in an order, might as well get fuses, 1N4001, 1N4004 diodes. Extra SCRs and Transistors. Make that shipping money stretch.
Quoted from RC_like_the_cola:Ed told me his 9 to 5 job is getting in the way of the GPE side biz
Damn 'regular' jobs!
SCRs are typically found on the early LDUs, on my Bally they were, 2N5060 or equal, also some 2N5401YBU used by the display driver.
https://www.digikey.com/product-detail/en/on-semiconductor/2N5401YBU/2N5401YBUOS-ND/975298
Aught to consider updating all the power caps while your ordering parts.
Yes, that would work.
If that is all your going to order, just PM me, I'll drop you a few in the mail. Pretty sure I have a few dozen somewhere.
Quoted from djreddog:Just buy all brand new boards, then you have nothing to worry about
^ or that!
You're currently viewing posts by Pinsider atari_daze.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-ali?tu=atari_daze and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.