Hard Body
Bally Wuff, 1987You're currently viewing posts by Pinsider Armyaviation.
Click here to go back to viewing the entire thread.
I am working on A hardbody And the displays were working but flickering so I decided to reflow solder on the pins for the connector. I reheated the solder bit on some I added solder. I checked continuity between pins and none were touching but when I powered the on the power arced across the pins. I removed the excess solder a tried again, now no displays but power at test points is good. Any advice
You're currently viewing posts by Pinsider Armyaviation.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-with-6803-score-displays?tu=Armyaviation and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Rock Island, IL