Hello. I picked this game up yesterday from some guy selling it on craigslist for just $150! Anyways, the left flipper isn't working. I moved to flipper board to the right hand side to see if the problem would move and it didn't. At first nothing was working on the left side, but after swapping the flipper boards around, I am now able to select left and right during the display games and spelling INDY at the top of the playfield. The solenoid on the flipper has been replaced at some time, and its wires are connected in the correct locations. Where else should I look or what should I do to get it working.

Thanks for any help,
David in Huntsville AL

That would be the guy. I gave him the money and started trying to figure out how to get it into my HHR. While trying to load it with the help from my brother, he came up to me and said I shorted him $50. I pulled out my phone and showed him the ad, but was ready to shell out the fifty bucks. He said he must have listed it in the paper at $200. The playfield is nearly perfect. The cabinet is faded, its missing the biplane, to get this post back on topic, the left solenoid had one wire that had a bad solder joint. It works now with no problems.

I'll try to get pics up later today. Me and my nieces and nephews have put about 50 games on it since yesterday. I notice that it sometimes delivers two balls to the shooter lane and the game acts as if only one ball should be playing. I'm sure the optics need cleaning, so that will be my next project.

I didn't get very many good pics of the machine like I thought I did, but here's the best of the ones I do have.

IMG_20120929_154616(1).jpg IMG_20120929_154535.jpg IMG_20120929_222637.jpg IMG_20120930_181937.jpg IMG_20120930_181951.jpg