You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Might be one of those games that needs a ball in the trough to start in attract mode. Also, sure the 43v solenoid voltage is getting to the bottom left side of the MPU board?
Could try reseating the top right 2 connectors on the SDB and the bottom left connector on the MPU board. If it boots, then you may have some tarnished pins to deal with.
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-troubleshoot-night-rider?tu=PinballManiac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
