The right slingshot and lamps all the way to the pop bumpers are out. Where do I start with this as a newbie? I looked at other threads about lamps being out. Would a fuse only blow part of the lamps in this machine? Can someone give a newb a list of things to look at here?

Many thanks!

I have some burnt on my J120. Took pics of some other weird looking stuff on the board where someone soldered wires and a resistor.

What do I do and what does it mean if it’s burnt out?

38F750EE-8B35-4E30-9BFA-424585EC7EDD (resized).jpeg

4F42B294-DD61-422B-B820-D18985F5132D (resized).jpeg

7EC2C301-4CF1-43B7-A82B-DA89756F3E16 (resized).jpeg

D4465A7A-87D0-4C13-ABEF-84AE588CC57A (resized).jpeg

Thanks

Connecter replaced and everything is working now. Thank you for your assistance in fixing it. I do have one other issue now which is my trigger fires the plunger but it won’t fire my cannon. It will auto fire only. I tested the switch is by putting the ball in the Canon and it recognizes when there is a ball in there and triggers the switch. When the ball is in there the group trigger switch also still works. I just cannot get anything to fire the cannon except an auto fire.

Thank you you have helped me more than once. This is an amazing fun complicated hobby but I’m learning.

My custom diy mods and the pin look much better with the lights all working. .

25EC4C52-4ADB-4FC2-9405-93005E055C1C (resized).jpeg

Removed and added to original reply

I’ve done a lot more reading and playing around. It sounds like the problem is that when I go into the gun test mode it says not at Mark. I’ve searched here but I haven’t found good instructions on how to adjust this but I’m going to look through the manual and see what I can find.