Creature from the Black Lagoon
Bally, 1992You're currently viewing posts by Pinsider pinrookie.
Click here to go back to viewing the entire thread.
Hi there
Does anyone installed this kit from Pinbits?
This is the link:
http://iobium.com/flashers_in_the_pop_bumpers.htm
In general, I am very confused in step 3
My question is where is this red wire connected to?
The picture show (pic 1) the large diode with a red wire is connected to the bottom right flasher. However, where is the other end connected to?
My guess is connected to the above flasher? I am not sure at all.
If anyone can answer my question that would be great.
Many thanks
Quoted from dsuperbee:Non banded side of the diode is the red wire, other end on the red/white wire. The red wire is the common, and pointed it in step 2 pretty well.
Hi dsuperbee
Thank you for the reply. Is it means banded side is connected to the bottoms flasher with red/white wire?
The reason why I ask this question is step two is not connected to the bottom flasher. Actually based on the step 2 pic the common point is connected to the flasher that is above the bottom right flasher without diode.
Should I just ignore the step 2 picture just connected the red wire from the common point to the bottom flasher (red/white) with a large diode? 
Many thanks
Quoted from 30FathomDave:This kit has been sitting in my garage for years. One of these days, I’ll work up the guts to give it a go.
Lol! I will let you know once I successfully installed this kit. Currently the pictures from Pinbits are very confusing.
Quoted from Pinrookie:Should I just ignore the step 2 picture just connected the red wire from the common point to the bottom flasher (red/white) with a large diode?
Finally I managed to install this kit successfully. I connected my red wire to the bottom right flasher (red/white wire) with a large diode. On the other hand, I didn't connect any red wire to the above flasher at all. 
You're currently viewing posts by Pinsider pinrookie.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-please-pinbits-creature-pop-bumper-upgrade-kit?tu=pinrookie and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
East Rutherford, NJ