chaskett I’m have the same issue all of a sudden?! Tilt switches seem ok? Time to look at cpu board?
You're currently viewing posts by Pinsider Croppie1Kenobi.
Click here to go back to viewing the entire thread.
Quoted from Daditude:Yes. Also, check your tilt bob to make sure something didn't push up against it (manual, coin box, etc)
Will do thanks.
Quoted from Daditude:Any progress?
Tearing my hair out trying to find a short. When the top drop target is activated it slam tilts.
Quoted from Billc479:Croppie
If the top target has a capacitor and/or resistor, lift one leg and see if the problem clears.
No joy. Diodes check ok.
C2703A77-820F-4055-A40E-716312BD118B (resized).jpegQuoted from Billc479:Croppie
If the top target has a capacitor and/or resistor, lift one leg and see if the problem clears.
There is a cap and resistor on the right sling which seems to cause phantom problems as well
You're currently viewing posts by Pinsider Croppie1Kenobi.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-pinbot-automatically-tilts?tu=Croppie1Kenobi and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.