New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 263718)

RESOLVED! Help Needed - Twilight Zone is dead

By gac

8 months ago

Topic Stats

  • 15 posts
  • 8 Pinsiders participating
  • Latest reply 8 months ago by gac
  • No one calls this topic a favorite


Linked Games

You're currently viewing posts by Pinsider gac.
Click here to go back to viewing the entire thread.

#1 8 months ago

Help! Odd thing happened today. I turn on my TZ today to change the time and I get nothing. No lights come on, clock doesn't move...nothing. I can hear a faint ticking sound coming from the back box. I haven't opened it yet as I have to move the machine to get at it. This is definitely a new issue with no warning. Nothing should have come loose as the machine hasn't been moved in years. Any thoughts? Is this a thermistor issue? Any and all help is appreciated. Thanks all.

#3 8 months ago
Quoted from motorbreth77:

Ya smell anything?

No... nothing.

#6 8 months ago
Quoted from TheLaw:

Check easiest first. outlet, plug, fuse in cab

Thanks. It shouldn't be the outlet or plug as other game on outlet is fine. It's plugged in and I'm hearing ticking sound in back box when switched on. There is power coming from the service outlet. Maybe the fuse. Will have to check. Hopefully I have one proper size on hand if that's it.

#7 8 months ago
Quoted from Niterider:

I’d start with just working the connectors on the boards and the ribbons. It could just be a bad connection.

Thanks. Will check out after I check service box fuse.

#11 8 months ago

Thanks everyone for your suggestions. I have not had a free second to dig into this yet. Just thinking out loud... I wouldn't think it is the fuse in the service box as there is definitely power going to the back box as I can hear a quiet hum and the "ticking'" sound coming from it. I'm thinking if it were that fuse, I would have no power going to the backbox. Is my thinking correct?

#13 8 months ago
Quoted from bssbllr:

I had an issue where the jumper plug in the service box had a bad jumper wire connection. The machine would not turn on, wiggled them around and she turned on. Someones bad crimp job.

At the test points was there any voltages.

Haven't had a chance to get in there. Not very good with a multimeter either.

#15 8 months ago

Well, I finally was able to get at my TZ. Before turning it on to open it up and see what leds were on or not on when I switched the power on, I simply reseated every cable and connector I could see. Turned the machine on and presto! She fired right up and appears perfectly fine. Has to be a connection that loosened up over the many years of play.

Thankfully, it ended up being nothing really. I would like to thank all of you that offered suggestions and advice. Other then reseating the cable/connectors I thankfully didn't need to try the other suggestions. It is all good information to have, however, if I do need it in the future. Hopefully I won't! Pinside is such a great resource. Thanks again everyone.

Promoted items from the Pinside Marketplace

You're currently viewing posts by Pinsider gac.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside