I am asking for this help because what I have is wrong somewhere and I want it to be right. The components are stacked differently.
The lock bar has three buttons (Left, Right and R). Each button passes through the lock bar to activate a switch. These buttons have a lock clip, a washer, a bar (Left and Right share a single bar) and a spring. Because the Left and Right buttons were assembled differently than the R button, I don't know which stack up is the right way. I think the stack up (from button top below the guide sleeve in the lock bar to switch) should be like this: washer, spring, bar, and lock clip.
I am unsure because if stacked this way and the bar binds on the button shaft, both the left and right switches could be activated.
Help me here, I think I am going nutz