No coils at all? Did you check them all in coil test? The fuses you replaced didn't blow again? Usually F112 is a bad rectifier or capacitor
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
No coils at all? Did you check them all in coil test? The fuses you replaced didn't blow again? Usually F112 is a bad rectifier or capacitor
Quoted from drsfmd:No coils at all. Yes, they were checked in coil test, and neither fuse blew again. That's what I'm puzzled about. Game *thinks* it's working with no error messages.
I hadn't considered a bad rectifier- I'll have to research how to test them, as I've never dealt with one before.
They're just four diodes internally, you can see them drawn on the schematics like that, so you can usually use diode test on them. I think the capacitors on the driver board might mess with that though. Fuse not blowing suggests maybe the bride is open internally, so if you get no reading at all both ways on any of the four internal diodes that'll tell you for sure.
Check ac voltage going into the bridge and dc coming out. If no dc or anything seems suspicious, I'd just replace it, can't hurt
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-me-help-troubleshoot-this-demo-man-solenoid-issue?tu=zacaj and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.