A13
But make sure that you fix the moon circuit board. There are some parts to swap to make this bullet proof.
You're currently viewing posts by Pinsider master_of_chaos.
Click here to go back to viewing the entire thread.
Quoted from roc-noc:Please tell more about this "fix". I own a really nice A13 and plan to keep it for a long time.
I´ve had restored an apollo somme months ago and there was a problem with the moon magnet. there is a fault in the design of control circuit. the user "Buja95" from the german forum "flippermarkt.de" has worked this out:
1) Replace R2 from the Interface Board with a wire bridge ( or 0K resistor)
2) Replace R41 (27K) on the driver board with a 1K resistor
3) Replace Q3 (P20N10L) with an IRL540
4) there are some parts added below the ciruit board ( resistor and diode) ,remove them.
5) forgot about the shottky diode as shown below..not really needed..
I have added 2 pictures ..
See aslo the servoce bulletins from stern sb80 and sb81
2013-11-13 00_21_37-Apollo 13 Magnet Modifikatiionen.docx - Microsoft Word.jpg
2013-11-13 00_23_12-Apollo 13 Magnet Modifikatiionen.docx - Microsoft Word.jpg
You're currently viewing posts by Pinsider master_of_chaos.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-me-decide-austin-powers-or-apollo-13?tu=master_of_chaos and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.